The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.
The 1988 Chevrolet Celebrity uses idistributorless ignition systems, the timing is controlled by the ECM. there is no provision for adjustment.
The timing on y our 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
How do you set timing on 1988-1995 Chevy Tahoe moters 5.7l?
The timing should be set to 10 degrees BTDC.
The 1987 Chevy Celebrity has distributor less ignition. The timing is controlled by the engine control module and there is no provision for adjustment.
how do you set timing on 88 s10 2.5? ?
after diconecting the computer, the timing should be ajusted and set at zero deg.!!! 00000
Your engine has distributor-less ignition. The spark timing is controlled by the ECM, there is no provision for adjustment.
To set the timing on a 1984 Chevy Celebrity with the V6 engine: 1. Disconnect the HEI connector so the engine will run in closed loop. 2. Start the engine and use an inductive timing light to check the timing. It should be at 100 before top dead center 3. If the timing is off loosen the clamp at the base of the distributor and turn the distributor so that the timing is set. 4. When you have set the timing tighten the clamp and verify that the timing did not change. If it stayed the same reconnect the HEI connector.
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
Timing on a 1987 thru 1990 Chevy Celebrity 2.8/3.1 engine is controlled by the ignition control module along with the engine control module. There is no provision or specification for manually adjusting the timing on these distributor-less models.
How do you set the timing on a 2000 Chevy blazer (V6)