Timing on a 1987 thru 1990 Chevy Celebrity 2.8/3.1 engine is controlled by the ignition control module along with the engine control module. There is no provision or specification for manually adjusting the timing on these distributor-less models.
The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
The timing on y our 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.
The 1987 Chevy Celebrity has distributor less ignition. The timing is controlled by the engine control module and there is no provision for adjustment.
To set the timing on a 1984 Chevy Celebrity with the V6 engine: 1. Disconnect the HEI connector so the engine will run in closed loop. 2. Start the engine and use an inductive timing light to check the timing. It should be at 100 before top dead center 3. If the timing is off loosen the clamp at the base of the distributor and turn the distributor so that the timing is set. 4. When you have set the timing tighten the clamp and verify that the timing did not change. If it stayed the same reconnect the HEI connector.
The 1989 Chevrolet Celebrity uses distributorless ignition. The spark is controled by the ECM, engine control module, and cannot be re set, or go out of time.
all jeep engines in 1993 have computer controlled timming. non adjustable
The timing should be set to 10 degrees BTDC.
how to set the valve timming on a nissan 1400
The 1988 Chevrolet Celebrity uses idistributorless ignition systems, the timing is controlled by the ECM. there is no provision for adjustment.
That requires an engine scanner to set the timing.
It requires an ENGINE SCANNER to set the ignition timing on that year of engine.