Want this question answered?
what year is my polaris 250 trailblazer ? vin number is 4xaba25c4y2453002
polaris 250 wont start
my 1998 Polaris Trailblazer has about 26hp and i have got it up to about 60mph
A picture of the clutch assembly removal process for a 250 Polaris Trailblazer can be found in the repair manual. It details how to access, disassemble, and remove the assembly.
your compression should be around 125-135 psi. for a 250cc polaris trailboss or trailblazer.
Ngk br8es
i would leave it alone.
well mine was doing it and finally the chan inside trnsmission broke
how do you tighten the chain on a 1999 polaris trailblazer 250 if the brake assy. is on the rear end then u need to loosen the 2 - 1/2 bolts on the bottom of the brake assy. and the to 5/8 bolts on the rear end then turn the part between the 2 5/8 bolt with a pipe wrench.
When you find out let me know,, i have a 2001 250 trailblazer doing the samething..someone told me it might be compresion also..do you know what the compresion should be ?? Richard Fisher rfisher1169@gmail.com if i find out anything i will let you know as well
Turn the fuel/air screw all the way in. Then back out about 1/4 turn. That should get you close. May have to tweek alittle in or out.
It depends on a trailblazer 250 they have no crankcase oil but on a 400 water cooled scrambler they do so yes you need to change the oil with regular motor oil