how do you tighten the chain on a 1999 polaris trailblazer 250
if the brake assy. is on the rear end then u need to loosen the 2 - 1/2 bolts on the bottom of the brake assy. and the to 5/8 bolts on the rear end then turn the part between the 2 5/8 bolt with a pipe wrench.
Ther are two bolts for the eccentric on the rear loosen the bolts and turn the eccentric to tighten . Chain should have a quarter inch slack in the middle ( with rider on machine ). When you sit on machine the pivot tightens the chain so dont get it too tight it will break .
what year is my polaris 250 trailblazer ? vin number is 4xaba25c4y2453002
polaris 250 wont start
There are two large bolts -one next to the brake caliper the other next to the chain - simply loosen those bolts and rotate the axle. The chain will tighten up or loosen up depending on which way you turn it.
Loosen the 2 bolts on back axle.... then turn the center carrier it is what is called a concentric and will tighten chain. BUT don't tighten to much
my 1998 Polaris Trailblazer has about 26hp and i have got it up to about 60mph
A picture of the clutch assembly removal process for a 250 Polaris Trailblazer can be found in the repair manual. It details how to access, disassemble, and remove the assembly.
your compression should be around 125-135 psi. for a 250cc polaris trailboss or trailblazer.
Ngk br8es
i would leave it alone.
well mine was doing it and finally the chan inside trnsmission broke
how do i adjust the chain on a Suzuki 230 quad runner