Want this question answered?
valves need adjusting,.030mm or .12
Adjusting the distributor sets the ignition timing. To set timing you need to align the timing marks as specified by the manufacture using a timing light.
You can set the injector pump timing on a 4HF1 Isuzu engine by adjusting the fuel injection screw. The adjusting screw will restrict the amount of fuel to be injected.
could be the timing is off or your valves need adjusting
The timing on a 2.8 V6 Chevy S10 needs to be set any time the valves, heads, or crankshaft are worked on. The gears of the timing chain and timing sprocket need to be aligned to set initial timing.
by adjusting the fuel injection screw
You can adjust tapping valves by adjusting the lifters.
if you mean the timing belt has not been set up correctly, you will damage the valves in the cylinder head
A CR 125 does not have a timing chain. It is a two stroke which operates with reed valves.
You can not set the timing. It is determined by the keyway between the flywheel and the crankshaft. It only goes in one place. You can adjust the coil, the valves and the carburetor.
i have a 1985 Honda civic and the valves need adjusting with a filler gage but i do not no what to set them on
No they are hydraulic valves and are self adjusting.