If you look right above where you head lights are there are some star screws and a level.Make sure you are on level ground the adjust the screws to where the level says level and you should be good. Hope that helps Jill
computer controlled.
how do you set the timing belt on a 1997 ford contour 2.0 4cy
u cant most newer vehicles timing is controled by the cars computer
you have to take the top off the camshaft and there a tool youuse to line them up before putting the belt on
Ignition timing is automatically set. sorry.
You cant. It is all controlled by the ecu.
buy a new or used set of clear lensed headlights with a xenon bulb
how do you set or check the timing on a 99 ford expedition?
I have a 1995 contour and all I used was a pair of ford radio removal clips. They look something like 2 inch horseshoes with small connectors on the end. They are inserted into the four holes in the radio to unlock it and then just pull it out. At first I talked the Ford dealer to unlock it, but ended up buying a set at an auto supply store. Mine have worked on the 95 Contour, 2002 F150 and 2005 Ranger. Each auto manufacturer has different unlocking devices.
you set timing by the marks on the cam shaft and the crank shaft. they should point at together to make it run right.
Turn the radio on. Holding down the 'clock' button and use '' (forward) to set minute.
With the ignition off set the park brake then turn the truck on and the light will be off