0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you you set the tide setting on a timex tide watch?
On the timex E tide, the crown has two positions, when you pull it out. The first position is for setting the tide. Pull the crown out to the first position and you should hear a small beep and the tide/temp hand will move to the 12 and 6 o'clock position. The red end of the hand should be at he 12 o'clock position, by default; this is the indicating end of the hand (for temp and tide). Now, use the buttons above or below the crown button to move the red end of the hand left or right around the dial, to the current tide. Once you have that set, push in the crown and check the tide. Push the button below the crown (tide button) and the tide/temp hand should move round to the tide time, you just set (with the red end of the hand marking the tide time)
How do you set time on Timex indiglo WR 30M?
To set the time, depress the MODE button until the TIME option appears. Then press the SET button, followed by MODE again. Then, press the START/STOP button to set the correct hour. Press MODE again and use START/STOP again to set the minutes.
How do you set a 3108 cardinal watch?
instructions for cardinal 3108 digital watch
How do you calibrate the Timex Expedition compass watch?
To calibrate compass, pull crown to MIDDLE position. Keep watch level or place on level surface (if band interferes, place watch on inverted cup). Watch may be face down, but take care to protect watch face. Press COMPASS push button to begin. Indicator hand rotates two revolutions to remind you to rotate watch. While level, SLOWLY rotate watch two revolutions, aking at least 15 seconds per revolution. This is critical in achieving proper calibration. When done, press any push button, keeping watch level. Indicator hand moves back and forth to acknowledge end of calibration and then moves to current declination angle setting. If you do not wish to set declination angle, push crown in. Otherwise, to have watch automatically compensate for declination angle, turn compass ring until north is at 12 o'clock. Press either TIDE or TEMP push button to move indicator hand east (+) or west (-) to point to your location's declination angle. On the Expedition analog compass watch:If your needle has begun returning to the rest position pointing away from 12 o'clock, it will also be off from North by the same amount. To reset the rest position, pull the crown ALL the way out, and use the top & bottom right buttons to return it to the 12 o'clock position. Fix the time (clock will have stopped with the crown all the way out.) Push the crown back into the middle position and calibrate (above).
How do you set the time on a michele watch?
pull the tab out and set it and push it back in.
How do you you set the tide setting on a timex tide watch?
On the timex E tide, the crown has two positions, when you pull it out. The first position is for setting the tide. Pull the crown out to the first position and you should hear a small beep and the tide/temp hand will move to the 12 and 6 o'clock position. The red end of the hand should be at he 12 o'clock position, by default; this is the indicating end of the hand (for temp and tide). Now, use the buttons above or below the crown button to move the red end of the hand left or right around the dial, to the current tide. Once you have that set, push in the crown and check the tide. Push the button below the crown (tide button) and the tide/temp hand should move round to the tide time, you just set (with the red end of the hand marking the tide time)
How do you set a timex TMX cr2025 watch?
I have received no information.
How do you set the time on a Timex Expedition Watch?
One way to set the time on a Timex is to press the mode button on the watch until it displays the time. Press set button and than the start/split button to change the time. Press the stop/reset button to decrease and press the set button again to set the time. Please refer to the related link for more information.
How do you set up the time and alarm on timex T123s clock?
set time timex t123s
How does one use a tide watch?
A tide watch is used to track tides. The location setting needs to be set at the nearest major body of water available in the watch menu. Most tide watches will then automatically follow the low tides of that body of water.
How do you reset your time on the Timex Ironman Watch?
In order to reset the time on the Timex Ironman Watch, locate the mode button and press it until the time and date show. Then locate the set button, press and hold until the word time appears and then release the button. Now set the time and press the set button one more time. The time has been reset and complete.
How do you find a Timex sports watch set up video?
Hey, I've just received a free Minecraft Giftcode! You can get one too! >> minecraftcodes.me <<
How do you set the tide and moon phase on a casio g shock g lide watch?
First, im not sure if it is the same for all watches but i have the GW7900b-1. Go to the tide mode, hold down the adjust button until the tide starts flashing, find out what time the next high tide is and bam the tide is set :)
How do you set time on timex wr50m?
:D
How do you set alarm on Timex T434S clock radio alarm clock?
how do you set the alarm on the Timex T434s nature sounds triple alarm clock radio
How do you set time for timex ironman global trainer?
It is automatically set when GPS signal is acquired.
How to set an athletic works AW149 with tide indicator?
You hold down reset button and then set it with tide indicator button.
