thats easy buy a new plug ! or use some PTFE tape plumers use it to seal taps rap it round the thread anti clock wise to the left about 3 times and put a new brass washer on it if you have not got one get one from a pluming shop enjoy !
if i remember correctly, once plug is turned counterclockwise to a stop, you must pull drain plug out slightly for antifreeze to drain.
The best way is to replace the drain plug with a new one. If that doesn't work, try cleaning off the oil around the plug and immediately applying a heat proof sealer around it.
A hair snare.
Replace the gasket with a fiber gasket.
Yes, there are things that you can do to stop the sewer from backing up in a rainstorm. For example, you can use a floor drain standpipe, a backup valve, a floor drain plug or an overhead sewer.
The thing that the water goes into is called the drain. And the thing you put in it to stop is called a plug.
if drain plug is stopped up, u need to lose antifreeze and flush radiator and then replace with new antifreeze as obviously the radiator and coolant are dirty or drain plug would not stop up
There is an o ring on the plug that will need replaced.
Magnesium sulfate drip is used to prevent or stop seizures during pregnancy. It is usaully given intravenously.
they are there to stop rain damaging leaves
Not the best choice
I need change the stop light in my Escape 2001 but I don't know remove the cover plastic