answersLogoWhite

0


Best Answer

You have to pop the cap off on the front of the acrylic handle, then under the cap there will be a screw to undo.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you take a single handled faucet off a bathtub?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why does it take a long time for water to drain from the bathtub when running water from the faucet. But when you run water from the shower head I have no problem?

More "VOLUME" flowing from the tub spout then the shower head as the shower head has a flow restrictor


Which steps should I take before re-glazing my bathtub?

My bathtub needs to be re-glazed. What are the steps one needs to take before bathtub re-glazing?


Why can't you turn the cold water faucet at all in bathtub?

Sounds as if it is stuck. Shut off water supply to it and take apart the handle and cartridge. Take the main internal parts to a plumbing store and get a replacement (made for all faucets) Then install carefully in reverse order to removal.


In kitchen why is water only coming out water spout and not main faucet?

Single and two handled faucets are different in the exact mechanism but the overall process is the same. Inside of the faucet there is a valve that diverts water from the main spout to the sprayer. Squeezing the sprayer handle opens its valve, releases pressure in the faucet, and diverts water to the sprayer.It sounds like this internal valve is jammed or broken.Call the manufacturer. I had this problem in the kitchen and Moen (the maker) provided directions on how to fix it. They can also direct you to a source for the parts.Visit a plumbing supply store. If you go during the less busy times of the day (late morning before lunch for example) they will often take the time to work with you.Replace the faucet.


Where is the main threaded ring located on a one handled faucet?

Depends on the faucet. The dome that the handle comes out of most likely comes apart where the curve meets the straight part of the faucet. On some, the whole piece comes off and the handle is held on with a nut under the dome. Most have a ring of ridges around the center piece to grip it. It will come apart where it is supposed to. If the faucet has leaked much the cap will most likely be corroded in place. It wouldn't hurt to spray the faucet with some lubricant such as WD-40 or other penetrating lubricant the day before you try to take it apart.


You Can Do Basic Faucet Repair Work On Your Own?

If your faucet is leaking, you can make some basic repairs on your own before you have to pay to have a plumber come in and do the work for you. For instance, it may be leaking because the connection with the pipe has come loose. All that you need to do is take a pair of pliers or a wrench and tighten the connection back down. This is the type of faucet repair that can be handled in just a few seconds. If the problem persists, then you may have to hire someone to come in for more advanced repairs.


How do you fix a belvedere 622 faucet from leaking?

As in any faucet, you take it apart and replace the cartridge or the rubber seal.


How many sheep does it take to fill a bathtub with sheep blood?

36.74 (assuming average size sheep and bathtub)


A faucet drips at 50l per day how many days will it take the faucet to drip a total of 1 kl?

5


How do you take off the handle on a single handle American Standard shower faucet?

Look under the handle for a small ALLEN SCREW (hex head). Loosen it and slide the handle off.


Why does the bathtub faucet run while showering?

If it is coming from the tub spout then the gasket is moving around or esle it is shot. The easiest way to fix this is to get a new tub spout. It will more than likely take more time to attempt to change the gasket on the spout then to install a new one.


There is no water coming from your hot tap in the kitchen hot water works in the bathroom how can you fix this?

If there is a shut off valve under the sink, shut it off and take the line off going to the faucet. Turn the valve on slightly to see if there is water going through it. If there is, the problem has to be in the faucet. Either the washer in the hot water side has come off and is plugging the faucet, or if it is a single handle faucet, the cup is bad. Either one is easy enough to fix. Message me back if you need help fixing it.