Hello! My name is Robert I am taking a brake from my 89 Chevy trans removal.1.You start by removing all the bolts to the mounting bracket and cross member.2.Using a block of wood wider then the trans pan jack it up. 3.remove mounting bracket and cross member. 4.remove transfer case (watch out for the fluid) 5.Remove exhaust 6.remove transmission. Hello! My name is Robert I am taking a brake from my 89 Chevy trans removal.1.You start by removing all the bolts to the mounting bracket and cross member.2.Using a block of wood wider then the trans pan jack it up. 3.remove mounting bracket and cross member. 4.remove transfer case (watch out for the fluid) 5.Remove exhaust 6.remove transmission.
You can but you will have to change or alter the drive shaft also.
Is there a manual to rebuild a 350 turbo transmission on a 1977 Chevy Truck on line that I can order or down load for free I think if you got to Chevy truck parts .com you can find one
It will be a 350 turbo if its a half ton. 400 turbo if its a 2500 or 3500 NEUTZ
That should be the 400 turbo.
If it is an automatic transmission then it will be the 350 turbo that was put in it from the factory.
yes just put one in my truck
1/2 tons used the 350 turbo and the 3/4 tons used the 400 turbo.
Probably a turbo 350.
Yes but you may have to shorten the drive shaft if it is a 350 turbo going to a non electronic 700r4
turbo 350
NO it will not work. YOU MUST PUT THE 4L60E 4x4 transmission BACK IN IT.DUE TO THE COMPUTER SYSTEM IN THE TRUCK.
Yes it will , but you may have to do some drive shaft work.