# Disconnect negative battery cable # Drain the cooling system if coolant is pretty new save it # compress the hose clamps with pliers and slide them away from radiator then detach the radiator hoses from fittings # Disconnect the reservoir hose from the radiator filler neck # Remove the bolts that attach the fan bracket and shroud assembly to the radiator and leanthe shroud toward the engine # If the car is equipped with an automatic transaxle diconnect the cooler lines from the radiator # Plug the lines and fittings # Remove the radiator mounting bolts # Carefully lift radiator out # Installing is reverse
take it to a mechanic
you take the intake out and put it by the manifold
its in front of your radiator. take your cars grill out and you would see it
how do you take out a transmission on a 1990 Honda accord
The decision to take it to a body shop for an oil change.
The Honda Accord engine of this year is an interference engine. Install this belt incorrectly, start the engine, and it will suffer damage. For this reason, I suggest you take it to a professional or buy a repair manual so you can do it right.
Look at the radiator, it should be in the front. It has a cap on it, take it off and you can put coolant in side.
have take motor and trans out 1996 Honda accord put timing belt
Chainsaw?
take off the door panels and unscrew the speaker from the door and unhook the wires and in reverse order install the new speaker(s).......
One gallon of antifreeze and 1 gallon of distilled water mixed together 50/50 will be enough to fill the system.
Take it to the dealer.