Want this question answered?
The coil is located at the back of the intake manifold. There are two bolts that hold it to the intake, and two bolts that hold it to the head.
The 1999 Pontiac Montana 3.4 liter engine cylinder head bolt torque specification is 150 pounds. The cylinder head bolts should be torqued in 50 pound intervals.
The 3800 Pontiac engine had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
15 ft lbs at a time until attaining 44ft lbs. Then turn all bolts in sequence 95% of a full 360 rotation
its behind the driver side head light. take the head light out and u will see the horn.
number 8 reverse torque
You can find the oil pressure sensor for your 1999 Pontiac Montana on the front of the engine. The low pressure oil sensor will be just below the left cylinder head.
first suggestion would be the head gasket which Montana's are notorious for having problems with, followed closely by a crack in your cylinder head or engine block
What is the head bolt torque for a 1997 chevy lumina four cylinder?
The 1995 Pontiac sun fire cylinder had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
195 fp n 205 for gt
Get the head gasket problem fixed.