Want this question answered?
There is a clip on the back side of the window crank that you have to take off, then take the door panel off.
you have to take the whole door panel off and get to it form that way
To access the speakers on a 2000 Malibu, you will need to remove the door panel. You also may need tools like screwdrivers and a wire cutter to take the door panel off. Before starting any removal of the panel, you should disconnect the negative battery cable.
take the door panel off to expose speaker
First you take the panel off over the mirror, it just pops off. Then you unscrew the screw behind the door handle. Then you just pop the panel off. Do it very gently as what holds the panel is fragile plastic plugs.
Take one screw in side the door panel\switch finisher and then you will find 2 screws holding the arm rest, take those out and then pull the panel out.
pop out small panel behind door pull remove two torx screws , remove two pop out connectors on outer edge of door panel near door latch ,grab bottom of door panel and pull it towards you this will release panel ,disconnect wires as needed if you want to remove entire panel from door, lift up on panel to remove it from edge of window track
need to know how to open the door from the outside of a previa 1992 to take off the panel
how do you take the dash board outon a 2006 chev Malibu
Take off all the screws on the door panel.
pull off the door panel, and the will be some plastic, pull that off and you will see the bolts holding the motor on the door, watch how you pull it off and remember how it go's back in, shouldn't take you more then 20-45 mins to pull it and replace it
You don't without breaking the door panel.