Hyundai Accent
Door Panels and Handles
Ford Expedition XLT

How do you take the door panel off of a 1999 Hyundai Accent?


Top Answer
User Avatar
Wiki User
2015-07-16 18:06:17
2015-07-16 18:06:17

Regarding removal of the Accent door panel: After removal of the four obvious Phillips screws securing the door panel to the door (located two at the bottom and two at the front just below the adjustment for the side mirror), remove the window crank handle ( in this case the "C" clip is located BETWEEN the handle and the spacer and usually oriented so the clip opening is in line with the knob), remove the screw securing the interior door handlde, remove the screw securing the door release (and power locks if equiped) the GENTLY pull the door panel, starting at the front then moving in a clockwise direction, to the rear which will have four plastic clips securing the panel at the rear. These need to be pulled out of their respective holes ( a special tool is available but not necessarily required). Once this is done lift the panel vertically to free the inner window seal. .

A good way to remove the C-clip is to slide a towel in between the spacer and the window crank and work it upwards until the clip comes off.


Related Questions

User Avatar

A door panel on a 2005 Hyundai Accent is mounted with screws and clips. Loosen all the mounting screws. Pull the panel outward and pop out the clips. Remove the door panel.

User Avatar

How do you remove front door Panel on Hyundai Excel 1999 to Rplace front door SPEAKER'S

User Avatar

Behind the glove box, above the blower motor.

User Avatar

rear door panel ,how to open.

User Avatar

I have 2000 accent, my fuse box is to the left of your feet as you sit in the drivers seat, on the side panel. There should be a small door. Hope this helps you out.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.