Want this question answered?
there should be two bolts behind the passenger seat, take those out. pull the strap on the passenger seat forward and pull the seat back. after you take the passenger seat off you can see the bolts for the front seat, take them off and back the seat out of the lip.
its on passenger side under car around back seat there is a metal plate you have to take off
yes two skrews r in under the scooter by the moter, just take them of and the seat pops off
take out the tool box u will see 2 nuts, use a 10mm wrench to take them off. pop out rear seat. to take off the front seat u take off the other two nuts on the back of the front seat. also 10mm wrench
underneath the back of the seat there are 2 crews undo them then take off the seat
You need to take the back cowling off to get to the "trunk" then take off the seat. under the seat should be the battery, just take off the two screws that hold each terminal on.
First you remove the glove box in the back of the seat. There should be two bolts holding the back section of the seat in. Take off the two nuts and lift the seat upward and pull back and it should come off. Then unbolt the front part of the seat and slide it back. It should also come off.
You can not take of the seat. The seat belongs in the car!!! I donot even know why you would even think about taking the seat out!! You are so silly!!!
It is under the seat. You need to take an Allen wrench take the seat off and you will see it.
Take off the seat
Take the seat off by unbolting it from the floorboard. Take the seat and the broken piece to a welder and have them weld or braze it back in place.
If it has bucket seats there are 4 nuts on each seat that hold it to the floor as the seat sits on studs, take the nuts off the 4 studs and unplug any wiring harnesses under the seat and then lift seat off the studs and take it out.