When you turn the ignition key to the run position , just before starting your Explorer , the check engine light should come on for a few seconds to prove that the bulb works
Simply turn on the ignition but do not attempt to start the engine. If the light bulb is good you will see the Check Engine light illuminate and stay on. If you do not see the Check Engine light, the bulb is defective or has been removed.
No, it will not.
Whether or not a car will pass inspection with the Check Engine light on is up to the state or county giving the test. As long as the car passes an emissions test, it should be fine.
With a scan tool
When a check engine light comes on the driver needs to fix the problem for the cause of the light to come on. If the light stays on, then need to perform The Stomp Test.
If you are concerned about whether the actual dash bulb works or not, when you start the vehicle, the 'check engine light' should illuminate for a few seconds then turn off. If not, possible bad dash bulb or other issues.
No, it will not.
It depends on where you live. In California you will not
You can take it to an auto store like autozone and they will run a test to read codes for the check engine light.
If a check engine light is appearing when the car starts then the ECU is receiving an alert from somewhere in the engine. The computer should receive a diagnostic test which will provide an answer as to why the check engine light appeared on the 1997 Honda Civic.
Yes.
Yes if it is emissions related.