There is a large nut in the center of the wheel under the boss cover, tighten it to the manufacturers specification. If, however, the steering is wandering this could indicate a loose steering/suspension joint or problems in the rack or steering column which must be checked out and repaired before the vehicle is used further.
check your centerlink and your pitman arm
How do you change a power steering pump in a 98 jeep cherokee?
remove transmission, usually dont come loose, might be a different problem
Should fit, yes
under the hood by the steering box
Loosen up the power steering pump and pull on pump till belt is tight.
No it will not the steering column in a 94 Cherokee only fits the 94 Cherokee. If i remember correctly 88-89 will workin an 89. I own a 94 Cherokee that i have to replace the steerin column in. nate
Tire/wheel balance, worn/loose steering components,
end of steering column under hood
something is loose
In the middle of the steering wheel
Right underneath the power steering pump. It is the only pulley without anything attached to it. You tighten with a bolt.
Only if you can tighten the belt without it.
To find out if a 2000-2004 Jeep Grand Cherokee power steering gear box will fit on a 1999 Jeep Grand Cherokee, call your nearest DIY auto parts store
No such partNo such part
1996 jeep grand Cherokee makes loud clicking noise when turning steering left
Is this a single belt or a serpentine belt system, if so look for belt tension idler pulley and loose belt, or single belt then you will need to loose and release tension on the power steering pump assembly.
You can find a steering wheel assembly diagram for a 1988 Jeep Cherokee inside the owner's manual. You can also find it in the vehicle's Chilton auto repair manual.
A shock absorber type unit attached to the drag link on the steering mechanism
underneath the steering wheel where the fuse box is.
Under The Drivers Steering
Look behind the steering wheel
it is under the steering cloumn