Theres a pulley tensionor, loosen the bolts to it, pull it tight and retighten bolts, but dont over tighten the belt... there should be alittle play but not much, because if its to tight, it can break, to lose and it will come off, once you tighten tensionor, it should have about a quarter of an inch of play.
The 93 Acclaim has a serpentine belt. The tensioner below the alternator is what keeps the tension. If you have not tension I would replace the belt first and then check the tensioner.
It depends on the year model of the car and the engine that you have.
Just below alternator.
You cannot tighten the belt. It has a tensioner that holds the proper tension. If the belt is loose then either the belt is worn out or the tensioner has failed.
loosen the tensioner assenbly with a 1/2" drive ratchet or a serpentine belt tool and reinstall the belt according to the diagram under the hood
The belt is self adjusted by way of a tensioner.
How do you tighten the serpentine belt on an oldsmobile ciera
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
Most serpentine belt systems have a self adjusting tensioner.
usually there is a sticker right inside the frame of the car near the hinge of the hood.
You do not tighten a serpentine belt. It has a tensioner that keeps it at the correct tension. If it is loose, either the belt is worn and needs replacing or the tensioner is defective.
You can tighten the serpentine belt on your 2005 Chrysler 300 by tightening the tensioner pulley. Push the tensioner pulley to the right until the serpentine belt is tight.
the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.
It uses a spring loaded belt tensioner I believe. The tensioner is automatically set. IF there is not enough tension, then replace the tensioner. The belt may be stretched and need replacment however.
Serpentine belt? You may have to remove to tighten alternator
Loosen the tensioner pulley. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
usually serpentine belts get their tension(tightness) from the belt tensioner
belt assembly for a 95 Plymouth voyager
you don't tighten a serpentine belt the tension is supplied by a tension pulley if belt is loose, it is time to replace belt or tension pully if tension pully needs repplacing belt will be worn anyway
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
If it is a serpentine belt you replace the tensioner pulley