Turn key on do not start engine, Then push the gas pedal all the way down to the floor 3 times being sure to let all the way off each time then turn key off and then start engine. If it don't work the first time may need to repeat steps.
Turn key on , do not start. Push gas pedal to the floor 3 times turn key off, then start engine.
How do you turn off the change oil light on a Chevysilverado 2002
hit your dome light on/off switch 4 times...it says how to do that in your manual
You can change the light bulb by this method.
change the oil
Is the fuel pressure ? is there spark at the plugs?
turn the key on and push the gas pedal to the floor 3 times in 5 seconds
Turn your key to on, but don't turn the engine on. Pump the gas peddle three times slow and steady under 10 seconds that is. And then turn on the car and the light should go out!
the socket should just turn out in the back under the hood.
turn on ignition switch and press and release the accellerator three times slowly within 5 seconds. turn if switch and recheck. if fails the first try it again.
expose back of bulb, turn to the left, replace bulb, return to socket, turn to the right
If you mean the change engine oil light, and if your truck is like mine,then you turn the ignition key to the on position,(don't start truck), and step on the accelerator three times, then turn the key off. The light sould be gone after that.