0
IF YOU REALLY DO HAVE THIS Q IN THE CORRECT SECTION..... the lights have come on automatically because of the automatic safety inertia switch turning on the hazard lights, automatically unlocking all doors and turning off fuel injection system immediately you got stuck in the beemer!! Drive more carefully.....To cancel the auto switch after checking it is absolutely safe to do so, reset by pressing it.....its mounted under the bonnet in the right or left hand corner, or under the dash at left or right or centre or occassionally under driver's seat depending on year/ model....it's got a soft rubber cover over the button- make sure everything is turnoff and it's SAFE!! to turn fuel back on!
Wiki User
∙ 17y ago
Wiki User
∙ 11y agoThere is a knob under the ignition switch. it says hazards, you must pull that knob back towards you until it clicks and your hazards will be turned off.
Add your answer:
Earn +20 pts
Why do hazard lights work but turn signal does not flash on 1996 Pontiac Bonneville?
You have a bad relay. Your blinkers run on a different relay than you hazards do.
Why would the signal lights not work at all. if the fuse is good and hazzard light. work on a 1996 Pontiac Bonneville?
More than likely a bad flasher relay for the turn signals. The hazard lights use a different flasher relay.
Why is it that the hazard lights work but turn signals do not in a 1996 Chevy Monte Carlo?
There are 2 separate flashers.jd
You have a problem with the hazard lights on your 1984 Ford F-350 when you turn on the hazard lights and apply the brakes the hazard lights stop blinking when brakes are released they resume binking?
get the whole care re wired also dont turn on your hazard lights!!!
After replacing the relays and fuses your turn signals still wont turn on in your 1989 Pontiac Bonneville LE the hazard lights turn on fine but the turn signals wont work what could be the problem?
I replace my flasher fuse.Now they light up but won't blink.
How do you turn off your hazard lights that are stuck on?
Pull the hazard light fuse.
How do you turn on the hazard lights on a 1996 Monte Carlo?
simply depress the hazard light switch on top of the steering column. if the switch does not turn on hazard lights the switch may need to be replaced. this is common with this body platform. Be aware that the turn signal and hazard switch are all one part. it is not a difficult task to change, but remember that you will need some expertise for dealing with the air bags and steering wheel removal
Why doesn't the turn signal lights turn on but the hazard lights work?
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
What are hazard lights?
Hazard lights are used on a vehicle in an emergency. The driver is supposed to turn the lights on the warn others that their car is experiencing some sort of problem.
What speed do you turn on hazard lights on the highway?
yu can turn them on at any speed
Why won't hazard lights turn off?
Bad switch?
Why do your hazard lights on your 1994 metro work but not your turn signals?
Turn signal flasher?
