Try turning the key to accessory, it worked for me.
The flasher that works the front turn signals also work the rear.
Did you change the bulb in the rear? Yes. The hazzard lights use the same bulbs in the rear as the turn signals. They work with the hazzards on but not with the turn signal.
you dont nid to change it is the same a/c is controled by the front control turn front on and turn rear on
front or rear turn signals
How do you change the -driver side rear bulb Ford Taurus Station wagon turn indicator? The front indicator works but blinks really fast.
The turn signals are not fused front and/or rear. If the rear are not working you need to check for power and grounds for the lights.
One or two front turn signal bulbs is busted. Check your front turn signal bulbs and replace it.
A break in the wiring for these circuits exists somewhere between the fuse panel and the rear assemblies. A wiring diagram would be useful in determining the point most likely for the break. The brake lights are on a separate circuit than the hazard flashers and the turn signals in many vehicles; and, the front indicators are a branch of the same circuitry which runs to the rear. The break in the wiring is downstream of this junction.
Use the same switch for the front wipers. Once the front wipers are switched on, the rear wiper will come on as well. However, a reverse twist of the switch would turn on just the rear wiper.
Just replace the front bulb, it's no good. That's why the rear one blinks so fast. I'll bet it blinks fast on the dash board too, doesn't it?
When you turn the front wheels, they skid sideways as they turn. The skidding wears rubber off the tire.
When you turn the front wheels, they skid sideways as they turn. The skidding wears rubber off the tire.