Are you sure your injectors are clean? Often this will cause stalling and eventually acceleration problems. You can purchase injector cleaner to add to your fuel which may solve the problem.
The price to replace a clutch on a Nissan Sentra depends on the year of the car. It can run from $130 to $301 to replace the part alone before any possible labor costs.
I have no idea to bad huh PEaCE
hi i want to know why when i press the clutch i hear noise
same thing started happening on my '97, you will probably need to have a new clutch cable installed. when they get old, sometimes they will start to fray which causes them to stretch and causes your pedal to become sticky.
It sounds like it is the clutch cable. I have a 94 Nissan Sentra and the clutch cable just broke. I have replaced one on an older Nissan, but it is still difficult for me to do on the 94. It is really hard to get the broken cable out.
I had the same problem and then my alternator went out. Replaced alternator and haven't had the problem since. Check your belts.
If a 1989 Nissan Sentra clutch pedal quit working and the car is now stuck in reverse, it will need to be towed to a repair shop to fix the clutch. The transmission may also be damaged due to it being stuck in reverse.
No, tranny comes out the bottom.
i have a 2000 Nissan sentra and it sometimes shuts off while moving slowly or when coming to a stop, is there a way to figure out what the problem is and how to fix it
replace your pressure plate (diaphragm type), and the clutch. replace your pressure plate (diaphragm type), and the clutch.
I need a diagram to connect at clucth cable from a nissan sentra 1993 4 cilinder stitf shift,
there will be a cable coming out of the drivers side firewall (the dash in front of the driver) it will go to a lever on the engine just above the gear housing. the gear housing is also on the drivers side, the cable will end with a bolt and nut attached to the lever you adjust it buy taking the nut and bolt off of the lever and turning the bolt tighten for a clutch that is slipping loosen for a clutch that isn't releasing the gears to shift