Want this question answered?
You have to have the code. This is to prevent someone from stealing the radio and installing it. To obtain the code for the radio, you will have to go to the dealership with your state registration so that they can get it from the manufacture. Once you have the code you can enter it using the number buttons on the radio.
You have to have the code. Check with dealer for that. You'll need the serial number to give them. It is generally a 4 number code. You use the "1" button on the radio to change the first number and "2" for the next number and so on and so forth. Once you have finished entering the code hold down the "skip >" button on the right of the radio for two seconds. There will be a beep and it will go back to the radio.
There is no such code, you have to finsih the game once to unlock some stuff.
A Honda dealer should be able to give you the code once you give them the vin# This happens whenever you lose power
The radio comes with a code. Turn on the radio and input the code. Once you have finished putting in the code, the radio will begin to play.
Anti-theft radio's can be unlocked when a unique code in entered into them. There is a limited number of attempts allowed. If you enter your code incorrectly to many times you will have to wait a set amount of time to try again.Methods of entering security codes vary by manufacturersThe correct procedure will be shown in you vehicle radio manualIn order to unlock a radio with a code once it is locked is going to greatly depend on what type of radio/stereo that is trying to be unlocked. Try entering the code with the station presets.
Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
Press the 6th radio preset twice and then the 3rd radio preset once.
using the station buttons , left to right , counts 1000,th, 2 botton100th,310,s and 4button 1,spursh each botton untile disired number from each botton , once you have the number in the display it should unlock, it might be nessary to pursh the power bottton once the code it displayed
First clear all codes. remove the neg. battery cable for 10 sec. then turn the radio on it will display CODE. Enter the 5 digit numbers using the preset buttons numbered 1 to 6. Yes above answer is right but don't forget you need to take out your radio and get the serial number off it and call your local Honda dealer to get the code to reset it.
Take your car to the vw dealership and they will give will put the code into your radio, however they will most likely charge you $100 dollars for getting the code for you and putting it in the radio. I see about 3-4 cars a day come in for radio codes so once you get that code keep it in a safe place you might need it again. On my 1996 VW Jetta you must hold down the right seek or scan button until the display blanks out. Then you can enter the unlock code.
To enter the radio code into your Nissan you need to turn your car to the accessories position. Then once the radio stops playing press the 4 button and the option will come up to enter your code.