One tube from the hand pump should be placed inside of the liquid that is to be siphoned. The other tube should be placed in an empty bucket or other container. The pump should then be squeezed and released to move the liquid from the container that it is currently in into the other empty container.
Use a mechanical hand pump.
Purchase a mechanical hand pump at almost any auto parts store. They are very inexpensive and safe use.
You can hot wire the fuel pump, or remove the tank and siphon it out of the pump mounting hole.You can hot wire the fuel pump, or remove the tank and siphon it out of the pump mounting hole.
Since that gas tank has no drain plug, that leaves you three options. Use a hose and siphon it out, pump it out, or drop the tank and drain it. You can purchase a small hand pump for very little and pump it out, which is the safest route. If you decide to siphon it out be very careful and do not swallow any fuel. It is deadly and even a small amount in your lungs will kill you.
No drain plug so a good old fashioned siphon hose or hand pump.
Probably, but why bother? Just buy a pump or siphon ready made.
There is an anti-siphon valve in the filler neck. You can not siphon.
Two, one electric and one siphon pump in the tank.Two, one electric and one siphon pump in the tank.
When the engine is cold just undo the bottom rad hose and let it drain out or use a cheap hand held siphon pump and remove it from the top of the radiator.
Since that gas tank has no drain plug, that leaves you two options. One, use a hose and siphon it out or two, drop the tank and drain it. Personally, I would siphon it out, it's a lot easier. The problem is how. Purchase a hand pump and long piece of flexible hose, and pump out as much out as possible. Use extreme caution when doing this. Gasoline vapors are highly explosive.
It is not possible to siphon from that vehicle, you either have to run it out with the fuel pump or drop the tank. To run it out with the fuel pump you have to unhook a line and start the pump with a scan tool.
There are many parts of a siphon pump. The main part is the tube that helps to transport the liquid. There may also be a motor to help move the liquid.