The puller will not put it back on. It's made to remove it only.
To reinstall the pulley requires a bolt about 3 inches long, a nut, and flat washer that fits the bolt. There are threads inside the hole on the end of the pump shaft where you insert this bolt. First place the pulley onto the shaft and hold it in place, then install the bolt into the pump shaft. Then hold the bolt head with one wrench, while you tighten the nut and washer against the pulley with another wrench, and it will push the pulley onto the shaft.
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
To remove that pulley with out damaging the pump or the pulley you need a power steering pulley puller. This tool will also install the pulley. Your local auto parts store can rent or sell you that puller.
Power steering pulley puller Snapon?
That requires a special PULLER. Need a power steering pulley Puller.
Not knowing what vehicle you have I can tell you that most power steering pumps require a special puller to remove the pulley off the pump and install the pulley without damaging pump or pulley. This puller can be rented or purchased from most auto parts stores.
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
You will need a power steering pulley puller. It is designed to remove and install the power steering pulley. If you attempt to remove the pulley without it you will probably damage the pulley or the pump or both.
It requires a power steering pulley PULLER. You can rent them at some parts stores.
the pulley is a press fit on pump shaft. need puller and installation tool to install. JOE
You will need to buy or rent or borrow a power steering pulley puller. Trying to remove and replace the pulley without the correct puller will surely damage the pulley and or the pump.
That pulley is pressed on and off. It requires a special puller to remove it and to install it.. Some parts stores will rent them to you for free.
That requires a special PULLER to remove the pulley.