* *
Back and align the tractor to the implement, first lower the hydraulic arm or the (pto) to the point where it can connect with the top most point on the implement, then slide the two lower or outer portions of the implement onto the bars that protrude from the outer most points of the triangular configuration on the back of your tractor.
Make sure to use cotter pins to insure that the implement stays in place.
You may have to adjust the pto height to align all points. Backing up evenly in line with the implement makes it a whole lot easier to attach the implement. Backing up unevenly or crooked will prevent the attachment of one of the arms if not both.
You can set the speed of the rotation on the pto using the throttle.
Yes and No. Your tractor would have to be equipped with a three point hitch. Some backhoes had the option most did not.
The three point hitch refers to the way ploughs are attached to an agricultural tractor. The dimensions of a category 1 hitch is 3/4 inch x 7/8 inch.
An integral plow is one in which the entire weight is carried by the three point hitch when transporting and it may or may not have a tailwheel and gauge wheels, a semi-integral plow has a wheel or wheels that remain in contact with the ground when transporting while the rest of the weight is carried by the three point hitch, a drawn plow is self supported on wheels and is attached to tractor solely by the drawbar.
A bedder.
I have a very big and shiny hitch on my truck
This depends on the type of carriage used. A three horse hitch is often called a unicorn hitch or a three up hitch. In Russia a carriage desined for three horses is a Troika.
It varies from 20 inches for a category 0 hitch to 32 inches.
http://www.tractordata.com/threepoint.html
i mounted the plow on the front by fabricating angle iron and used cable mounted to the three point hitch in the rear to raise and lower it
The state of Illinois requires that the hitch must be less than four inches from the rear of the vehicle when the hitch is not in use.
You just have done . .
A compact tractor is a smaller version of an agricultural tractor and most commonly used attachments in compact tractors are front end loader and three point hitch.