The children all made a small armature with soft metal rods.
In DC series motor, field and armature are in series. so we use only two points. They are line and armature. therefore we use two point starter.
armature reactant means loss in armature associated with inductive properties of the coil, while armature reaction include losses due to magnetizing component of current flowing through armature.
yes
you want full field while starting 0 Ohms and maximum series on armature then bring the armature resistance to zero as it approaches running speed its a good idea to run with armature at 0 ohms armature will use the same amount of power as the resistor If you want to run at more than base speed you can now weaken the field
24 volt armature is accept balancing cut
It does have armature resistance.
armature reaction means when load is added to the armature then current is passed through armature conductors then in armature creates flux. It is demagnetize and cross magnetize the main field flux. in other ward it is effect of armature field on main field.
well you use a magnet to lots of things... from handbags to compasses!!unistation 360 plz like
The armature voltage is a critical parameter in the determination of performance characteristics for the DC machine. The armature voltage has been shown to be proportional to the magnetic flux density per pole and the armature speed. Thus, the armature voltage will also exhibit nonlinear behavior when saturation occurs. The analysis of DC machine performance typically requires that the characteristics of the armature voltage saturation be known. This information is typically provided in a plot of the armature voltage vs. field current (magnetization curve) for a given operating speed
Armature reaction is the interaction between the magnetic flux produced by armature current and that of the main magnetic field in an electric motor or generator.
Armature reaction is the effect of armature flux on the flux generated by the fied windings.Cross magnetisation and Demagnetising are its consequences.
this is wer the armature conductors ar being mounted,therefor it helps the flexibility of armature conductors.