Depends on type of plug and where it's supposed to go.
they cant work propaly
No, the wide prong is neutral it is the white wire. The narrow prong is hot it is the black wire. The round prong (in a 3 wire plug) is safety ground it is the green wire.
Drivers side, front plug.
You get a two wire plug!! You should never try to skip connecting the ground wire, the soul purpose of the ground is to create safety for you and others around you. the problem is that someone may assume that the ground is part of the wire since the plug is a three wire!! \You will have to skip the ground terminal on the plug. Usually plug has a green screw or wire, ground pin is longer than two other and round in shape.
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.
Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?
propaly farmers
bad spark plug wire.
I need a lot more information. I don't know what you mean by four wire plug. What does it look like, what was it used for? What three wire plug are you installing, what does it look like, what is it used for. What color ore the wires?
to the furtherest plug! Plug #1 is probably the longest wire
how to replace plug wire on a toro mower
If it is the same plug every time, I would say the plug or wire is grounding out some where. Try replacing the plug the the wire.
A 2-pole wire will not work on a 3-pole plug. You will need to use a 3-pole wire on a 3-pole plug.
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.
i have a metal sleeve over each spark plug wire at the motor.....cant get the wire out to get to the plugs?? how do i get the wire off the plug??
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
no it can not start with a broken spark plug wire unless you fix it