the Jake brake and similar brakes redirects the engines exhaust, using the resulting compression to slow the cylinders of the engine which cuts the rpm dtrastically, therefore slowing the vehicle.
Are you talking about the Jake Brake on semis?
Yes you can
You really don't need it. You just need to identify which harness goes from the ECM to the jake brake.
a Jake Brake
Bad switch, bad wiring, ECM fault. If your jake brakes still work, you can rule out the accelerator position switch. The brake position switch might be reading that the brake is depressed when it isn't.
You can run the overhead, on your Caterpillar 3176 diesel engine with a Jake brake, by removing the Jake brake. Next, remove the valve cover. Adjust the overhead with the adjustment screws.
buy a Jake brake kit from banks or something
Yes you can. There are 3 places on the passengers side of the valve cover (1 for each head) where the jake brake wire plugs in. If you unplug each of those wires, you will disable the jake brake.
no, he is working on her new movie
to truck drivers to hit the Jake brake is to pull on a handle on t he sterring column and shut down the engine
You're talking about an engine compression brake, commonly referred to as a Jake Brake.
Clessie Cummins