Muzzle flash is the result of a stream of hot gas mixed with particles of burning powder exiting the barrel. The function of a flash hider is to keep the shooter from being blinded by his own muzzle flash when firing in low light conditions. Some people think it is supposed to make the shooter less noticeable, but that is incorrect.
With these two things in mind flash suppressors work by diverting the flow of gas down and forward, away from where the shooter is likely to be looking. The most primitive flash suppressors are funnels with the wide end pointed forward. Fancier ones use directional slots to divert the gas and some really advanced ones use baffles and expansion chambers to route the gas in a longer path to allow the powder particles to burn and the gas to cool before it exits the device.
The most effective flash suppressor is a silencer.
1/4th of the flash hider
If the flash hider is removable then you just screw it off and screw on a silencer. If the flash hider doesn't come off there is currently no good solution other than modifying both the flash hider and a silencer to attach and be secured on the gun.
Most guns with removable tips come with a standard reverse threading that accepts most muzzle accessories.
No
Yes.
Bayonet holder, flash hider.
The flash hider on the Barrett M99 airsoft can be changed, but unless you are using the gun for display only or movie production you want to make sure that the new tip does have the blaze orange that will comply with federal law. When using or transporting the gun without the blaze orange tip, any law enforcement agencies will treat you as if you are using a real steel model because they have no other way of telling the difference between the actual or airsoft models.
Most likely ccw. The threads on my Echo 1 M4 are ccw. I assume you mean for the flash hider, right?
1/2 28
First thing that you will have to do is get the adapter for the end to accept the 14ccw then attach the muzzle brake
it depends on the scar that you have. if you have a d boys or agm scar or echo 1, they will all have a 14mm CCW front flash hider. in that case, you can just buy a mock silencer and replace the flash hider. or you can buy a quick detach silencer which is what i use. you should check airsplat.com for silencers, they have a really good selection.
hider in the house