answersLogoWhite

0


Best Answer

The fuse box is constructed of a rigid plastic. Each individual fuse fits into its own slot. On the bottom side of the fuse slot there are provisions to hold a brass, aluminum, or gold pin. These pins get crimped or soldered onto the end of a wire, are inserted into the fuse panel, and are held in place by various types of "strain relief" usually clamping onto the wire insulation somewhere so no force is placed on the copper wire itself. The fuse fits into this pin tightly to make connection and supply voltage to a circuit. The main power wire to the fuse panel is usually a larger wire - 4-10 gauge and has an eyelet on the end. The eyelet fits over a threaded stud on the side of the fuse panel and supplies voltage to one pin of each fuse or relay.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does a wire connect to a fuse box?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace battery cable?

You have to disconnect the ground wire from the block. You have to disconnect the positive wire from the starter and the alternator and the powerline going to the fuse box. and connect the new ground then the positive


Why is the orange wire coming from the fuse box to the head light switch burning up?

There is an oversized or malfunctioning fuse in the fuse box. The fuse should blow before the wire is damaged.


When installing a CD player in a 1992 Grand Prix SE if the ignition wire isn't working is there a fuse for this and where does this wire lead to?

yes there is a fuse in the fuse box. the wire will lead to it or to the ignition switch. But the fuse to amke the hot wire hot is in the under dash mounted fuse box.


How do you connect remote wire to amp into Pontiac grand am stock stereo?

The remote wire requires a 12 volt power source that comes on with the car. The easiest thing to do is to wire it into the fuse box...coordinate with the diagram to find a fuse that comes on when you start the car or turn the key to accessory, such as turn signals, windshield wipers, etc.... Pull that fuse out, put the bare wire into where the fuse goes and secure it with the fuse.


Location of fuse box on a ford transit connect van?

location of fuse box on a ford transit connect van .Hi,The fuse box is located behind the glove box.Empty the glove box and lower it, when it's down push the sides and it will drop down further allowing access to the fuse box.


Where do you hook the ground wire on a porcelain light fixture on a metal box?

Connect the ground wire to the metal box.


If we connect Fuse wire to neutral how will it affect safety?

prepare to fry


Do you connect a fuse to the live wire or the neutral wire?

You connect the fuse to the live wire as it is the one with the potential difference of 220V and in case of short circuit current will blow out here


How do you hard wire to a car fuse box?

I use it from my car box the battery.


How do you fix a burned wire that is plugged in at the fuse box under the Bat sign?

To fix a burned wire that is plugged in at the fuse box under the Battery sign, the wire will have to be removed and a new one soldered in place. Before doing this, find the cause or overload that caused this wire to burn in the first place. It could be that a fuse of too high an Amp was placed in the fuse box by mistake.


On the factory radio wire harness of a 2002 Oldsmobile Alero what color do you connect to the remote wire of your amplifier?

If you are unsure of the remote wire, locate your radio fuse and get a fuse connector. hook it into the fuse and run it wherever you need it. all the remote does is swith the equipment on and off.


To find a fuse for the starter in the fuse box for a 2001 SL2 Saturn?

The wire from the battery to the starter does not include a fuse.