answersLogoWhite

0


Best Answer

In many cases, the brake light and the turn signal use the same bulb.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does activating the turn signal test the brake light bulb on a vehicle?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is an easy way to check the bulb for the brake light on a vehicle?

An easy way to check the bulb is by activating the turn signal. Most cars however have 3 bulbs in each tail light housing. one for brakes, one for reverse, and one for the turn signal. The most accurate way is to tap the brake pedal.


Brake lights do not work all the time replaced brake light switch?

If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.


What is the color code for wiring my 1996 S10 blazer trailer hitch?

Vehicle side, Brown, running lights Yellow, left signal/brake light Green, right signal/brake light Black, ground Trailer side, white is ground


Why does the car's electrical turn on when the brake pedal is depressed and the car is not running?

It turns the rear brake lights on as a safety feature. The brake pedal is pushed in, causing the fluid to move forward in the brake cylinder,activating a brake light switch. Even if the vehicle is off, the lights will still come on.


Why does the Third brake light blink when turn signal is in use?

You probably have a turn signal bulb with two filaments one for the turn signal and one for the brake light. If the ground connection is bad on the turn signal circuit then the current would need to find another path to ground. The only other one available is through the brake light filament to the ground on the center brake light. Try removing the taillight assemblies from the vehicle look for what is probably a black wire screwed to the body or a circuit connection and either tighten the screws a bit or clean the connections.


Why do your tail lights work but not your brake lights?

They are two separate circuits, each has their own fuse. The brake lights not working could be caused by a few things such as a blown fuse, blown bulbs, bad brake light switch, misadjusted brake light switch and depending on what vehicle you have, a bad signal light switch.


The driver side brake and signal light is not working on my 98 Chevy 1500?

most likely a bulb b/c if it was the fuse your other brake and signal light wouldn't work... most vehicles the brake and signal light are all in one bulb... try replacing the light bulb


What does it mean when the rear brake light does not work and the turn signal flashes fast?

Usually when ones turn signal is blinking fast its telling you that a turn signal bulb (and in some cases a brake light bulb) is out. If it blinks fast when you turn on the the left signal the burnt out bulb is on that side of the vehicle (could be front or rear bulb so you'll have to check). And vice versa


How do you replace the tail - turn or brake light bulbs on a Ford Explorer sport?

No vehicle year was given so I have to keep it general... Ford Explorer Sport turn signal / brake light bulb lamp replacement: Purchase the correct replacement turn signal / brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement turn signal / brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for turn signal / brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


What would cause both the turn signal and brake light fuses to blow on a 2001 Ford Escape?

short circuits in the turn signal and brake light circuits


Which fuse do you change for the right side rear brake and turn signal light on a 1984 GM Van?

If only the right rear brake/signal light is effected it is not the fuse. Inspect the right rear brake/signal bulb, socket and wiring.


Why does signal light stop working when you press brake pedal on 2003 Kia Sedona?

possibly have a brake light out