press the set button then while the set light is on press the seek and scan buttons to change the hours and minutes.
turn the raido off and hit the set button, use the seek buttons, up for the hour, down for the min.
Turn the Radio off, Push the set button, use the seek and scan buttons to change the time
you just hold the hour button for a few seconds,same as the minute button. for a few seconds.should move. when it moves,go to the right number on your clock :)
how do you set the clock on a 2003 chevrolet trailblazer
Press the set button then within 10 seconds push the seek and scan buttons to change the time.
you need to remove the timing cover and make sure the cam is pointed to 3 o clock and the crank gear has a small 0 on the timing gear that has to be pointed at 12 o clock
turn radio off n use radio knobs to set the clock
Check the fuses Should have 2 fuses for radio/clock one for radio and a separate one for the memory circuits
Im pretty sure that it doesn't need to be set just put it back on the same way you take the old one off.
The turn signal switch location on a 1991 Chevy Lumina is behind the steering column. You will need to use a socket set to get to the switch.
How do youchange the clock on a 2002 zx2 ford escort?
Consult the owners manual.
Go to Chevy dealer with proof of ownership and VIN. They can cut you a fresh key.
Press and hold down clock button while pressing hr/min.
To set the clock on a 2002 Chevy cavalier you must press and hold one of the arrow keys located near the clock. You will hear a "beep" this is letting you know that your car is ready to set the clock. Quickly after you hear this beep, press the arrow buttons up and down and that changes the time. Leave it alone after the time is set and it will set itself permently until you change it again!! Very easy!
There are to buttons "up" "down" press and hold the left one to change the hour.Press and the left one to change minutes.
read the owner's manual
show me the radio in a 2002 Chevy mabliu l s or show me how to set the clock on the radio
Hit clock symbol button then adjust using the right tuning knob. Thanks, Wes
If you had keys with computer chip embedded,you will have to go back to a dealer,and have it checked&ordered..
Press the set button then within 10 seconds use the seek and scan buttons to set the time.
hold set button then hit scan for mins. and seek for hour. then hit set
AnswerTurn the radio off first. Press the set button. Use the scan and seek buttons to set the hour and minute.
Borrowed from silverado answer: Push the set button and with the set light on, press either the scan or seek buttons to change...
Contact your local Chevy dealer if you can not find instructions in your manual.