Dash board instrument panel lights do go out over time...the bulb(s) burn out or become loose. Replace the bulb(s). See sources and related links below to lookup the correct bulbs for your vehicle.
There is not a reset for the break wear indicator light on the Mercedes-Benz GL450. You will need to fix the problem before the light will go off.
replace front brake pads
Just turn the key to on (second) position - where you see all the lights come on the dashboard and wait till the brake wear indicator light go off. If you replaced the tripped brake wear sensor, the light will go off in about 10-15 seconds...
Go get it serviced.
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
what need to do when indicator light is on
Yes, the GFCI green light indicator is on.
To reset the brake wear indicator on a 2011 Renault Master, first, turn on the ignition without starting the engine. Then, press and hold the brake pedal while simultaneously pressing the gas pedal. After a few seconds, release both pedals. This should reset the brake wear indicator, and the warning light should turn off. If the light remains on, consider checking the brake system for any issues.
To turn off the brake wear indicator light on a 2002 Porsche Boxster, first ensure that the brake pads are replaced if they are worn out, as the light indicates that the pads need attention. After replacing the pads, the light may turn off automatically. If it doesn't, you can reset the indicator by disconnecting the battery for a few minutes or using a diagnostic tool to clear the fault code. Always consult your owner's manual or a professional mechanic for specific instructions related to your vehicle.
The third generation iPod shuffle has the indicator light on the top Êclose by the earphone port. This indicator light tells you about the battery charge status.Ê
Brake pad wear indicator on left side of steering wheel. Glow plug indicator on right side.
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.