0
How hard is it to get the fuel pump out of the gas tank to install a new one in a 89 pontiac trams am with a 5.7?
Wiki User
∙ 11y ago
It is very simple once you remove the gas tank from the vehicle. The hard part is getting the gas tank out of the vehicle.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you install a fuel filter for a Kia Sportage?
it is not hard ,but need model and year.
Where is the fuel filter located and how do you replace it on a 1994 Pontiac Grand Prix SE?
i believe that the fuel filter is in front of the gas tank .which is kinda hard to get at
How do you remove and install speakers in a 1992 Pontiac Grand Prix SE?
with a screw driver it would help not hard to do use the brain
How much is a fuel pump for it Kia sorento 2004?
Depending on brand-200-260.00. They are not hard to install, but if you pay labor on an install it would be 200-600, depending on shop.
How hard is it to replace the fuel gauge sending unit on a Pontiac Bonneville?
Should'nt be that tough. You have an access cover in the trunk under the carpet on the right side. Pull out the fuel pump and the fuel guage sending unit is part of the assembly.
Why is my 1999 Pontiac Grand Am 3.4 hard to start when warm It starts right up then dies no problem when cold.?
Replace the fuel pressure regulator, it is leaking fuel past the diaphragm and flooding the motor.
Where is the fuel filter located on a 1987 Pontiac 6000 le?
Look by the gas tank. It may be inline by the tank or in the tank itself. Good luck. Not to hard to change.
Is it hard to install a fuel filter on a Chevy Cavalier?
It's in the rear near the tank. You'll need a tool to make it easy. I wish I had used it! Easy to do.
Hard starting diesel engine when engine is hot?
Most of the time a diesel has a hard time starting when its cool. When they have a hard time starting when hot, it is usually caused by the fuel running back into the tank. Check for a cracked fuel filter housing or a cracked low pressure fuel line. It is possible you have the wrong fuel filter. Install a top quality name brand filter like Wiks or Baldwin that has an anti bleed back valve in the filter.
What are the prosejers to install a hard drive besides the motherboard?
What are the prosiejers to install a hard drive besides the computers motherboard
How hard is it to install a garbage disposal?
If you are good with electrical wiring, it will not be that hard. If you aren't that sure, you should get an electricican to install it.
How do you install a fuel pressure gauge on a 1984 corvette?
Crossfireinjection.net sells some nice hard piped kits that hook between throttle bodies. Otherwise you have to install a t with a shrader valve on the rubber fuel line, preferrably after the filter. Then hook a gauge 0-15 psi preferrably to the bull end of that T.
