Very important!
torque for 2c engine cylinder head bolts
A C15 Caterpillar engine has dozens of torque specifications for many different engine bolts. The head bolts should be torqued at 350 pounds.
Conrod bolts
the proper torque specification for the geo storm 1.6 engine is 58 ft lbs ... Always torque in a spiral from the center outwards. Make sure you cleaned up the threads in the block ith a chaser (NOT a tap) before proceeding. And oil the threads on the new head bolts. You should be able to turn the bolts all the way snug with your fingers if the threads are cleaned up correctly. Then torque in 3 stages to the final torque in a spiral from the inner bolts.
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
The 3800 Pontiac engine had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
Torque specs for main bearing
5a engine con/main/head torque specs 5a-fe engine
If it bolts up it is installed correctly.
Torque for which bolts?? need more information.