Want this question answered?
The minimum thickness for SMAW welding is about 18 ga. with a steady hand.
They typically take up A LOT of space. Supercomputers have the following disadvantages: - Generate a lot of heat often require water cooling in addition to an A/C system - High power requirements which cost at minimum $400 per hour or $3.5 million per year as an example - The initial purchase can be at minimum $100,000 - Large space requirements
minimum date is 1980. maximum date is 2099.
what is the minimum hardware components required for the POST to pass
ethernet frame required minimum of 64 bytes expalin why?
Disc (Rotor) Minimum Thickness is determined by the motor vehicle manufacturer during initial vehicle design. Most of the time it is stamped on the rotor itself. Some states have rules on what they consider the minimum safe thickness. Look on the rotor.
2004 ford explorer minimum rotor thickness
Minimum thickness is .8898 in.
It is the safe and legal minimum thickness allowed for a brake rotor.
Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm
The 2001 Pontiac Grand Am minimum brake rotor thickness is .075. The minimum brake rotor thickness is a standard minimum. Certified mechanics cannot use the brake rotor when the thickness drops below this level.
The minimum thickness should be cast somewhere on the rotor.
Thea minimum thickness for a 1996 Toyota Corolla rotor is .787, measured in In thousandths of an inch. Anything rotor that does not meet this minimum thickness should be discarded.
The minimum thickness number should be cast into the rotor.
The minimum thickness on the front rotors for a 1994 Mustang Cobra?æis .97 inches. The minimum thickness on the rear rotors is .50 inches.?æ
3/16" thick is the minimum thickness Sagiita that can be measured by means of spherometer.
Front Rotor Minimum Thickness after machining the rotor is .996