Want this question answered?
Output of the alternator is controlled by the voltage regulator.
12 volts
It controlls the output voltage of the alternator.
it's an nternal regulated alternator it's an nternal regulated alternator
There should be a heavy wire called the Alternator output wire, It carries power from the alternator to power your accessories and to maintain your battery. The smaller wires usually in a plug are either the alternator's voltage sense, Stator/ACurrent/Tachometer output, regulator/indicator light. or if its an Externaly regulated alternator they will be alternator Field, Stator/ACurrent/Tachometer. hope this helps
To limit the rate at which the charge is put into the battery in order to prevent overheating, boil-out of the water in the acid electrolyte, and eventually ruining the battery.
it should have an internally regulated alternator
It controls the output voltage.
The AVR (Automatic Voltage Regulator) control the DC field voltage to the rotor of the alternator, as soon as higher load is demanded from the alternator, the AVR output voltage go higher, hence, a higher AC voltage on the output of the alternator. If the voltage go to high then the AVR is faulty.
The alternator is not adjustable. The computer controls the voltage output.
Alternator Output Voltage RangeGenerally, alternator output voltage is consider OK if it is in the range between 12 1/2 volts to a maximum of 16 volts.Therefore, although the output is at the maximum, you do not seem to have a problem.Usually, if the battery has had a lot of drain, then the alternator output will run at the maximum until the battery is fully charged.
Automotive Alternator Output VoltagesWith a properly operating alternator, AND electrical system, a voltage output range of 13.5 Volts to 16 Volts is considered acceptable.Just the alternator puts out around 120 vac, but most newer alternators include a built in rectifier that limits voltage output to between 13.5 and 15.5 volts DC depending on speed.