Want this question answered?
4-6 hours if you used a primer.
Absolutly! You just have to check to see if the primer is first an exterior primer and if it will stick to glossy surfaces. You can lightly sand to rough up the surface or just clean the surface and apply the primer. For oil based primers I would recommend Beauti-tone's fast dry oil primer or Zinsser's oil based cover stain primer.
Yes, you can.
that is fine as long as paint is dry before coating
Minwax stains are made to go directly onto wood. You do not need primer, and I think it looks awful over primer.
If you not sure about what kind of paint was used prior to your paint job( an oilbase paint or waterbasepaint)and you want to use an acrilic or latex, always use a primer paint first to prevent blissering.
First, clean the tile and grout with a harsh cleanser such as T.S.P. Next, apply a bonding primer to the tile with a brush or roller. It can be oil-based or water-based, and you can thin it slightly if needed to get a smooth, even coating. Once the primer is dry, apply your alkyd (oil-based) paint over the primer with brush or roller.
Yes, but be sure the kilz is completely dry before applying the paint. The Kilz formula is such that it has no effect on the application of water borne paint, when it is completely dry.
apply sparingly and allow a full minute in between applications until adequate coverage is achieved. if you glop it on, it takes forever and looks terrible.
Primer can sometimes be sticky if it does not dry well or is put on too thick. In most cases where there is low humidity a primer should not be sticky.
how long does roof cement to dry
Yes, but you will want to lightly sand it first, then use a barrier/adhesion coat of primer such as Kilz, or a good alkyd primer.