I did mine myself and it took me just over 4 hours. depends on which motor you have mine was the 2.2 liter. you have to remove the exhaust and the front half of the motor. Still relatively easy. best thing to do if your going to do it yourself is to get the Haynes repair manual from your local autoparts store
Remove the cylinder head from your 1992 Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.
how much u think auto zone or pepboys will charge me to fixa head gasket on a chevy blazer 1996
Take the intake as well as all hoses and lines off of the top of the engine. Remove the valve cover gasket. Unbolt the exhaust manifold. Unbolt the head and remove. Replace the gasket, then reverse the procedure to finish the installation.
Remove the cylinder head from your 1992 Chevy 350 cubic inch engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
Remove the old head gasket and put the new one in its place. Pretty simple
Remove the cylinder heads from your Chevy engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and reverse the process.
i would love the help please
Blown head gasket - Warped or cracked head - cracked block.
You do not repair a head gasket you replace it with a new gasket which requires removing the head.
The only repair is to replace the head gasket.
You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.