This question is nonsensical, there is no answer.
230V AC describes a 230 volt potential (in form of alternating current), but does not imply a minimum, maximum or actual current (ampere).
In Western Europe, 230VAC or 240VAC domestic circuitry is typically fused with 13A, 16A or 20A, but other values are possible and common.
To answer this question the horsepower or kW of the motor is needed to make the calculation.
It is drawing .06 amps.
It would be at least 250 amps, maybe 300 amps.
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
Have to know the wattage or resistance of the lamp to answer this question.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
read the name plate on the motor
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
8,33 Amps
24.87amps 1 hp=746 watts P=IxV ... (746x8)/240
it draws 210 amps
It is drawing .06 amps.
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
110 volts divided by 1,300 watts(1.3 kw) = .09 kw or 900 watts.
It would be at least 250 amps, maybe 300 amps.
1.25 amps
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.