6 bolts actually hold trans to engine. 4 from back, 2 from the front.6 bolts actually hold trans to engine. 4 from back, 2 from the front.
There are 6 bolts that hold the trans. to the engine block.
take the bolts out and it should come out take the bolts out and it shold come out
I am trying to take the motor out of a 95' Olds cutlass supreme. The trans. is giving me problems. How many bolts hold it in.
you must lower rear of trans by removing crossmember and use along extension.gmjim
Two on the engine, one on the trans.Two on the engine, one on the trans.
The 4.3L has 7 total , including bolts holding oil pan to trans. Also, there are 2 alignment guide pins that can be a pain sometimes, but other times they slide right apart
pull the trans. and ther are 5=6 bolts
The bell housing is the part of the transmission case that bolts to the engine.
how many mounting bolts on 1997 3500 chevy 6.5 diesel manual transmission
You can turn engine by crank bolt to get at them 1x1, but you will still have to remove trans to get it out. Once trans is off, it's a little easier.
make sure the bolts are removed from above in interior, remove trans bolts, lower on suitable lift. May have to lift engine a bit.