2
You can not unclog it. You will have to replace it and that will take a mechanic about 2.5 hours.You can not unclog it. You will have to replace it and that will take a mechanic about 2.5 hours.
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
parts and labor it should run you about $300 and change. Replace the drvive belts too.
The ignition coil for a 2.5l v6 cost about $140.00 in NL . And at least 3 hours labour. My mechanic can't find the ignition coil on my 99 dodge stratus!!
two to four hours depending on your machanical ability
According to our fleet mechanic. The time in the book says 18 hours.
The 'spluttering' is not caused by water in the engine but by water on the wires or coils or in the distributor. If you're not talking about a volkswagen, let it idle for about 10 minutes and then let it sit for a few hours (hood closed.) If this is a Volkswagen replace any ignition coils and wires the vehicle uses. Drying will not help. The damage is permanent.
I can do it in about 2.5 hours. Any competent mechanic should also do it in under 4 hours. But they will charge for 6-8 hours FYI
5 hours give or take a little.
the switch is about $55 and the labor is .5 hours (or about $50
To be fair: about 4 hours. I charge $240.00 labor to do that job.
should only take 2-3 hours if your good around autos