Want this question answered?
4.5 quarts with a new filter.
For a complete drain and fill, the capacity is about 16 quarts. If just doing a filter change, the capacity is closer to 7 quarts.
With doing a complete drain and fill, the capacity is 10 quarts. If only doing a filter change, the amount needed is 7.4 quarts.
The Intruder uses 5.3 US Quarts for an over haul, 4.5 US Quarts with Filter Change, and 3.9 US Quarts for an oil drain with out changing the filter. That is the factory spec.
The Dakota 4.7 take ATF +4 fluid, not Dexron or Mercon. The capacity for a 45RFE transmission is 14 quarts after a complete drain. Otherwise, it is 10 quarts for a complete drain, or 4 quarts for a filter replacement.
If you change the filter and drain the pan it takes 4 1/2 quarts.
three quarts if you drain everything and change the filter
there is a drain plug on the bottom of the trans will drain out about 4 quarts should change the trans filter located on the front of trans while your at it
Drain then change the filter.
Hey J==If they flush it with a machine, it takes about 12 quarts but if they just drain it and change the filter it is about 4 quarts. GoodluckJOe
unscrew oil drain plug,drain into pan.unscrew oil filter,drain into pan. replace oil drain plug,screw on new filter(handtight)add at least 4 quarts name brand oil,start car,check for leaks
7.5 quarts is per the manual. You need to buy at least 4 quarts of 20w50 for the change. This is without an oil cooler, but if you have one, it will not add much if any capacity, because the oil in the cooler will not drain when you drain the sump. Also, if you use a larger filter than stock, take that into account.