2
You can find that answer at Crutchfields.com under support
The amplifier is a mono block subwoofer amplifier design to only run subwoofers. Feel free to give us a call to help with your order 800-854-5821
Certainly, you can also use 2 mono amps to power left and right stereo channels. One for each channel. Using one mono amp for stereo results in a mono output though.
A monoblock is a type of amplifier used in car audio systems. What the monoblock type of amplifier does is to split the two channels of audio into two separate mono systems, giving a little more kick to the bass coming out of subwoofers.
guitar to cable to amplifier there is a 1/4 stereo or mono jack you plug the cable into , from there plug the other end into the amplifier and press on
yeah it is i had 2 12s and 2 10s hooked up to a 900 watt amp and it hit hard
A mono amplifier. You need two for stereo.
A mono amp will not sound good with door speakers. There are to be used with subwoofers
you need a phono/mono plug to a 3.5mm jack. on the back of your amplifier, plug the red and white/black phono/mono plugs into the inputs commonly labelled aux. white/black into white/black and red into red. on the front of your amplifier, select aux and just plug and play.
Yes this amplifier is a mono amp so it is internally bridged. It does not have a stereo output.
There are a bunch of important factors to consider prior to buying an amplifier for a vehicle. Primarily, you must decide what the amplifier will be primarily used for. If the amplifier will be used for powering subwoofers it would be good to consider the bridged or mono capabilities as well as ohm ratings of the amplifier as well as the draw, or amount of power the amplifier will pull from the car's electrical system. The most important factor in considering an amplifier for powering subwoofers is probably output watts, which will determine the amplifier's power to the speakers and the amount of bass to be transmitted. If the amplifier is to be used to power mid or high range speakers, a multi channel (four or more) amplifier should be considered because of the ability to run multiple sets of speakers or component sets off of the different channels of the amplifier. The considerations inherent to the subwoofer amplifier are also present including watt ouput and power draw, but when selecting a multi cha
A mono (single channel) amplifier may be used for powering a subwoofer.