0
The small ones have 153 teeth, the large ones are 168.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How many teeth on a Chevy 305 flywheel?
Depends. There were 168 and 153 teeth. Both were used on 305's.
How many teeth on ring gear of 4g54 engine?
The Mitsubishi 4G54 engine uses a flywheel with a ring gear that has 131 teeth. This ring gear is essential for the starter motor to engage and crank the engine during starting.
How do you know how many teeth are on a 350 Chevy flywheel?
There are two common flywheels or flexplates for the 350's. The one that is just under 13" diameter is 153 teeth. The one that is just over 14" is 168.
How many types of starters are there for a 1983 305 Chevy engine?
Depends on what the 305 is in, a 305 camaro engine needs like a 9 tooth starter because the fly wheel is 12.75 inches in diameter with 50 some teeth. A 305 in a Chevy half ton will have like a ten tooth starter for the 14.25 inch diameter flywheel that has like 60 some teeth. All 305 engines before 1986 are the same they did have different flywheels for what ever Chevy put them in. 1986 and newer 305's had different cranks the flywheel bolts up different on a 1986 305 compared to a 1983 305.
How many labor hours for a flywheel on a 96 Chevy truck?
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
How many bolts is a 91 Mitsubishi Eclipse Gs non turbo motor flywheel?
The flywheel for the FWD tranny should have 6 bolts. The turbo flywheel has 100 teeth and the nonturbo should have 106. The AWD flywheel should have 7 bolts.
1984 ford Bronco2 new flywheel and starter will engage one time then spin What causes this?
Assumeing it's the same starter, the bendix(the gear on the end of the starter that engages the flywheel)could be bad, and or the starter it self could be bad. sounds like number of teeth on new flywheel does not match number of teeth on starter. find out from mechanic that installed new fly wheel, how many teeth on flywheel if he doesnt know, a ford dealer can tell you from the part number on your receit. then ask how many teeth should be on starter to match fly wheel pull starter and count teeth
How many teeth do flies have?
No No. Flies vomit on their food to dissolve it then suck it up with a straw like extension. A flywheel has teeth.
How many freeze plugs are there between the engine block and flywheel on a dodge 3.9 liter v6 engine?
Two.
How many different tooth numbers are there for a Chevy 350 flywheel?
Theres 153 and 168 tooth flywheels. Are there anymore?
How do you know how many teeth you have on your crank wheel?
By crank wheel I assume you mean flywheel. The answer is you take the transmission off and count them.
What causes problems with the fly wheel and starter to reoccur on my 1988 Chevy pickup 1500 since both have been replaced?
is the problem,that the flywheel teeth are being chewed out and same on starter. or is the problem that starter and flywheel do not mesh properly when engaged? if either of thses is the problem,this means that the gear on the starter is not matched to the teeth on the flywheel. other problem that could be causing this is none or incorrect shims used when installing starter motor. to fix this, you need to make a mark on the flywheel(use white out or something like that),and count the number of teeth.then do same on the starter motor.then find out from a drive line specialist,how many teeth shoud be on starter motor to match the flywheel.they can also tell you the shims to be used when installing starter motor to get proper clearance.
