Want this question answered?
375 sound right?
I know exactly what you mean, I have the same engine in my Pimp-Mobile. Homie! You get roughly 4,000,000 horsepower from it. You go from 0-60 in .12 seconds. I KNOW THAT IS SSSOOOOO FAST!! sry caps.
400 hp give or take..my friend has a machine shop and has very good luck with pro comp heads..
Why 400 heads? They are notoriously bad flowing heads without much modification the engine would be about 360 cubic inches, but the heads have nothing to do with the size of the engine.
30-50 appx
How much hp should I get out of my Chevy 350 bored .040 with six inch rods shaved block and heads. I'm running a 500 500 lift cam with 106 degrees of lobe separation
depends on the pistons . and the heads . with stock style dish and decent heads your around 240-250hp with flat top pistons your around 275hp if you have vortec heads you can be well over 330hp-400hp
It is unknown how much rockers like Nightwish earn as the spend has never stated how much they earn. It is safe to assume they earn alot due to their high fame status.
305 is a small cubic engine the cam sounds about right for it but keep in mind the small bore so you really dont need the 1.94 valves get you some 601 ho heads they have a lil bigger valve than most 305 heads but not quite 1.94. run a flat top piston and a thin gasket cuz compression is horsepower. make sure you dont over carb it and you should be good to go.
Depends on the punk rocker.
No two motors have the same exact horse power the only way to find out your motors power is to have it dyno tested.
Produce more HP depending on much much they were bored. The engine can generally be bored up to .060 over in most cases.