30 amps
Watts = Amps x Volts. Amps = Watts/Voltage. Amps = 2500/apply voltage here.
Parasitic draw on most vehicles should not exceed 50 milliamps (0.05 amps). A luxury vehicle with lots of accessories may draw as much as 80 milliamps (0.08 amps).
Watts = Amps x volts. What is the current draw and voltage of the calculator.
It's 75/120 and the answer is in amps.
Each electrical equipment draws a different amperage. Most residential dishwashers draw about six amps. There has to be a specification sticker on the inside of the door of the dishwasher ,which must such information stated on it. Commercial dishwashers could draw sixty amps and be using three phase power!!
The 194 bulb is ~3.8 watts, at 14 volts they draw 0.271 amps.
Depends on the voltage. Wattage is Volts x Amps. Resistance (ohms) is Volts divided by Amps. So on a 120V circuit, it would draw 41.66 amps. To do that, it would need a resistance of 2.88 ohms. But on a 240V circuit, it would draw 20.83 amps. That would require a resistance of 11.52 ohms. Determine the circuit voltage, then use that to figure the amps, then use that result to calculate the resistance necessary.
Remember that watts are voltage x current(amps) The number of watts you can get from a 48V battery will depend on how many amps the battery can deliver and how much the load can draw.
The wiring should allow for 115 amps.
A fuel injector's current draw, measured in amps, is a function of the fuel injector's actual impedance. Your answer is then necessarily dependent upon the impedance of your injectors. To determine your injector's draw, simply divide voltage by ohms. That is, given a 12v circuit and an injector with 12 ohms resistance, the draw is 1 amp (12 divided by 1).
The MacBook Pro cases are much larger and sturdier the the MacBook Air cases.