Since it's hard to say whether you are asking abouy 10 thousand feet (10,000) or ten feet (10.000) I'll just say the answer is sqft/6 for 2 inch depth. So, it's either 1666.66 cubic feet or 1.6 cubic feet of Macadam or asphalt.
2.15
14.81 yds
625 times 0.5 = 312.5 cubic feet will be needed
40.1 cubic yards
A square foot has 144 square inches. The calculation will give you 14,400 square inches.
Depends..of course, but I would say from $1-$2.50 a sqare foot (my Ohio price). The factors to increase tht cost are base materiail cost, blacktop cost, how much time in your site preparations
12" x 8" = 96 square inches
Approximately 16.33 square feet.
144
184.08 square feet is needed.
It costs about $2.30 per Square Foot.
You needed to specify to what depth the asphalt is being laid.
First, find the total square footage of your driveway. You can find this by multiplying the length of the driveway by the width of the driveway. When you have determined the square footage, you need to decide how thick you will apply the gravel. At a depth of 1", 1 cubic yard of gravel will cover 320 square feet. So for example, if you would like to put down 3 inches of material over 1000 square feet, you would do the following. 1000 square ft./320 = 3.125 3.125*3" depth = 9.375 yards
the answer is 6 by 8=28********************************6 inches x 8 inches = 48 square inches
52 square inches for each layer, minimum with no overlap anywhere.
1024/4=256x256=65536 square feet
Each tile will cover 100 square inches. 12,000 square feet is 1,728,000 square inches. You will need 17,280 tiles.