Want this question answered?
You will need to remove the instrument cluster board. To do that, remove the trim piece around the instrument cluster, then carefully pull the instrument cluster out of the dashboard. Note that the instrument cluster plugs in to a socket in the dashboard, so be careful as you remove the circuit board so that you do not damage the plug. Once the instrument cluster is out, replace all bulbs. They twist to remove, and if the odometer bulb has failed, the others are getting old too. It might be best to replace them all to avoid future problems.
Behind the instrument Cluster. Or remove it and replace the Cluster.
You take out the cluster and replace the bulbs in the back of the cluster. Very simple job, takes baout 10 mins!
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
Below the instrument cluster is a trim piece that goes across the width of the instrument cluster. Remove the 4 screws then remove the trim piece. Remove the screws that retain the instrument cluster, then carefully pull the instrument cluster STRAIGHT BACK. The instrument cluster plugs in to a matching socket in the dashboard. Be certain that the pins do not get bent. It's a good idea to replace all of the bulbs once one burns out. The rest will be failing soon. There are two types of bulbs used in the dashboard, they might only be available at a GM dealership. Replace all of the bulbs. Carefully push the instrument cluster back into the dashboard, then test the lights and make certain that the instruments and indicator lights work before putting everything else back together. Replace the trim ring around the instrument cluster. Replace the bottom trim piece... Done. ... at least, that's how it works on the 2000 LS
Sure, but at some effort. You need to remove the instrument cluster from the dash to replace it.
To get to the clock you must remove the black plastic piece that is around it that surrounds the computer buttons and surrounds the instrument cluster. There are some screws around the instrument cluster, the rest snaps together.
How can I replace the headlamp on a 2000 Saturn SL1
Bad news - there is no light bulb. The cluster is light using electro-luminesence, which means the entire thing needs to be replaced.
Buy a bulb from the Honda dealer or auto parts store (so you get the right one). You will need to remove the instrument cluster trim panel, and then remove the instrument cluster itself. Change out the bulb. Detailed instructions can be found at Alldata and on the internet.
The 2000 Saturn does not have a distributor. Instead it uses a "coil pack" system.
The instrument cluster can be replaced. The connectors on the back of the instrument clusters are the same for all versions of that generation of the Ford Focus. There are however problems when doing this: -The odometer will show the miles from the old cluster. The milage is built in to the cluster, not the car. -Some panel lights (like the ABS light) may light up depending on your vehicle's options. It is sometimes possible (although usually relatively expensive) to have the cluster reprogrammed at a Ford dealership to correct these problems.